2005 Nissan Pathfinder "belt noise" Questions

...which means you can't tighten, (spring tension already applied by tensioner) you have to change the belt, to get rid of noise, and if noise comes back in short time, think about changing

...belt on it. The noise went away. The mechanic at the shop could not pin point the problem but he said it was a common problem with the new pathfinder. he said they usually change the belt and ...

...A/C clutch bearings while you are at it. If there is any roughness or play in the bearings, this could generate noise. Needs belt changed. spray some wd40 on it if it stops making noise replace ...

...Belt noise 3L V6 - replaced the front oil seal, timing belt etc. After re-assemble per the Haynes repair, I continue to have what sounds like timing belt rubbing on pulleys or covers. disassembled to ...

...as soon as i turn heat off the noise stops sounds like a loose belt!! After your vehicle heats up, spray your belt with water. If it squeels, it's a belt. If not, it'll be a tensioner or

...a sqeeking noise..for like 1 or 2 seconds... only does it when in drive. not while in reverse or neutral sounds like u need a new belt may be dry rotted or just worn but also look at your belt ...

...noise came back. I was told that I need to replace the a/c and the alternatoR tensioner bolts is this true It is your Belt Tensioner. You will need to Locate the Belt Tensioner. It has a Large Pulley ...

...get your hands around the belt or moving parts. If the squeaking stops then it probably is the belt. If you still hear the noise squeaking it could be idler pulley or bearing going out on

noise on the belt returns. Can someone tell me what else I should do? CHECK EITHER YOU HAVE A PROBLEM WITH THE BELT TENSIONER OR THE CRANKSHAFT PULLEY ( VIBRATION RUBBER EITHER IS BROKEN OR STARTED TO

...noise when engine starts It only lasts for a second but it sounds horrible. I don't know if it's the engine or a belt or what. More than likely the belt is glazed or it is a pulley bearing that is ...