2005 Nissan Pathfinder "attach cable outside door handle" Questions

...when trying to open from the outside. its most likly not a door loock problem its probally a cable issue if the handel inside attaches via cable and its wrong best solution is to pop pannel off ...

...outside door handle is still attached and is not broken. The cable attached to the interior door handle is attached and not broken. I cannot remove the latch mechanism because the bolts are installed ...

...always attached with outside door handle and i can't find out how to release the cable between the outside door handle and the latch. Take it off the door handle side of the cable, not the latch

...cable are attached. central locking working ok The outside handle sounds like it is no longer attached to the mechanism that allows the door to open. Take the door panel off and look inside to ...

cable from the latch. remove the screws on the outside and then you will need to unhook any linkage connected like outside handle rod going to latch, take note of the location of anything removed from

...outside. 2006 Kia Rio is a cable not a rod and most often the cable will break at the connection point near the handle, there is a metal end that is manufatured on the cable and where these two meet ...

...OUTSIDE - IT IS A 2002 NISSAN ALTIMA - There is a cable that attaches to the inside door latch release handle. The plastic that retains this cable is most likely broken. I have seen this before. If ...

...outside mirror, there are 3 flexible cables sticking out of the assembly that I don't know where to attach....wondering if the "motor" is missing although it is a manually adjusted ...

...attach cable to top of mechanism that feeds to outside rear door handle that usually goes onto the top latch.. be better to remove top latch an visibly see the eye where to hook ur cable for solid ...

...outside handle works fine. its almost like the door lock lever is set to lock, no real resistance when pulling lever. pulled door panel and everything looks fine at handle end, but cant see latch end ...