...Valve Timing Control Performance Bank 1 This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve. The ECM receives signals such as crankshaft ...
Question about Nissan Maxima
...valve timing.The code means the computer "sees" the valve timing as out of range and/or not controllable. Possible causes could be a defective or stuck solenoid valve, dirty oil causing a ...
93 maxima can you fix or clean (instead of replacement) the idle air control valve? You may clean it(might or might not work), but it will be only a temporary fix. It's recommended to replace the unit
timing belt. If the valve covers are BIG aluminium ones , than that's a VE30DE engine with timing chains. Or if your speed goes to125MPH than its a VG30 , but if it goes to 145MPH than its the VE30DE
Question about Nissan Maxima
...valve timing control solenoid has already been replaced. What else could cause this? I think I answered this a couple of weeks ago on a different Nissan. Both codes are saying the computer can ...
...out of time due to a broken timing belt the pistons can contact and bend...in this case the intake valves.if belt is on properly perform compression and leakdown tests to confirm damage to ...
Question about Nissan Maxima
...valve timing. Usually the valve is faulty or there is a problem with oil pressure.Since you say the oil pressure light is coming on, I would expect to find a problem with the oil pump or ...
Question about Nissan Maxima
...very slow and draggy. the code 0300 came up which tells me it is a random misfire. what could be causing that misfire? valve or ignition timing could be out by 1 or more teeth. Re-check valve ...
dies on idle speed,not all the time but some times idle control valve ?? Yeap, I would look in the area of IAC valve. However, be carefull. If your Maxima has A/T trans, than your car is set up with ...
...valve timing on bank two. Your Nissan is probably new enough to have variable valve timing. The computer controls valve timing by using a control valve in the heads. This component would need to be ...
1,975 questions posted
Usually answered in minutes!
1,122 Questions
1,007 Questions
857 Questions
783 Questions
480 Questions