...thermostat housing to disconnect. We have taken all bolts loose but will not come apart. Not sure if you have the 2.7L or the 3.5L so I'll post for both sizes for you: 2.7L Removal procedures ...
...thermostat housing. Remove nuts from heater tube flange studs. Loosen starter bolt at heater tube bracket. Pull heater tube out of thermostat housing and position out of the way. Remove bolt and two ...
...thermostat housing. Remove nuts from heater tube flange studs. Loosen starter bolt at heater tube bracket. Pull heater tube out of thermostat housing and position out of the way. Remove bolt and two ...
Replace thermostat in a 1997 Dodge Intrepid The thermostat is an easy replacement. The part from the part store should be very inexpensive and is very easy to install. IMPORTANT: allow the cars ...
...thermostat housing. Remove nuts from heater tube flange studs. Loosen starter bolt at heater tube bracket. Pull heater tube out of thermostat housing and position out of the way. Remove bolt and two ...
bolts holdng housing then remove thermostat. Put new thermostat in same way as old one, put on a new gasket and replace housing. Be careful not to overtighten housing bolts. Refill with new antifreeze
...HOUSING BUT THERES NO THERMOSTAT THERE I JUST DID ALL THAT WORK TODAY TO TURN UP WRONG Follow the top radiator hose back to the motor.Should be right there.Remove two bolts and inside should be the ...
thermostat is in the housing so you don't put it in backwards and replace with the new one. 8. Remove all of the old gasket and sealant from the housing and cover with a gasket scraper. 9. Install the
...hose connects to the engine. The housing is held to the engine with bolts,and has a gasket that must be replaced when you replace the thermostat. Make sure all surfaces are cleaned before
790 questions posted
Usually answered in minutes!
1,166 Questions
867 Questions
924 Questions
766 Questions
627 Questions