2001 Chevrolet Venture "replace crank sensor van" Questions

replace both crankshaft sensors on a 2000 Chevy Venture. I have located both on the van but can not decide the best way to get to them. Why would you change a crank sensor It failed a test? How was it

...replace you crank shaft sensor, it is located on the bach of the engine ( fire wall side ) just above the oil pan rail close to the bell housing. when the engine is cold the sensor will have a ...

...crank shaft sensor. hope this helps and goodluck! I had the same problem with my 2000 Chevy Venture. First with no engine codes, and problem solved by spraying carburator cleaner on the throttle ...

...sensor data parameters is what you should do . 064 Emission Tests Scan Data Pre Check 002 Fuel System Tests Start Here Without testing we'd only be guessing . You wouldn't want to replace a bunch of ...

...Van and I cannot get the thing to start. I have replaced the fuel pump, crank sensors, and now the ECU. The engine cranks but will not start. If I give the throttle body a shot of starter fluid it ...

...crank position sensor.but sensor is fine there should be a 5v feed but there isn't one ,checked wire back to ecu and its ok. But carnt see it being fault on ecu van drives and performs great once ...

crank the van to see if you have spark that far, test and replace spark plug, (do not get shocked!) then look into a new injector or a good cleaning. The dealership has access to tools that area great

...replace crank sensor on 96 3.3 mopar van... now I gotta no start... do I need to reprogram something...? Videos that may help in the link. ...

crank shaft sensor. Van drove fine, has a slight stutter. 3 days after replacing the crank shaft sensor the van stutters and dies within 10 seconds of starting. any ideas? maybe have autozone or equal

...REPLACE SERPENTINE BELT. ABOUT 12 INCHS OF THE BELT WAS JAMMED BEHIND THE HARMONIC BALANCER. NOW THE VAN WONT START BUT CRANKS FINE. VAN HAD NO STARTING PROBLEMS BEFORE THE BELT BROKE. WHAT COULD IT ...