1996 chevy lumnina crank shat sensor is located where? The crankshaft sensor is mounted behind the harmonic balancer on the passenger side of the vehicle.
I need to change the harmonic balancer on my 1998 chevrolet lumina 3.1. Do I need a special tool to remove it? u will need a special crank pulley removing tool.
knocking from pulley knocking from crank shaft pulley already replaced all other pulleys Sounds like a bad harmonic balancer
...sensor is located lower rear of engine right above transmission There is a second one right by the harmonic ...
replace motor mounts which ones do you need the dog bone at the radiator or the one under the motor next to the harmonic balancer or the transmission one
how do i change the harmonic balancer on 97 lumina? you may have to use a three fingerd pully
95 lumina shakes while in park Car drives really smooth just shakes a little while ideling harmonic balancer, or bad motor mounts
...balancer off. I there a ''trick'' to getting the nut off ? Jeff most harmonic balancers are pressed on. you need to borrow or purchase a puller to remove the balancer. pay attention to the style of ...
where is it cranks positioning sensor located on a 1991 Chevrolet Lumina 3.1 They are behind the harmonic balancer. Passenger side, lowest pulley on the engine.
Question about Chevrolet Lumina
...van that ran rough and backfired. now wont start doesnt seem to be timing. any suggestions? Timing mark is on harmonic balancer and distributor is pointing at where number 1 is on cap try a new ...
228 questions posted
Usually answered in minutes!
964 Questions
809 Questions
661 Questions
639 Questions
448 Questions