...bumper and apron on 99 S10 · It's an easy one to do. You can chose a bumper that you can paint or choose a chrome one that I have in the picture then it saves you from painting. The bumper ...
s10 hood wont open with latch, tried bouncing hood while latch pulled but will not work. What now, read remove grill but looked at instructions, said open hood take out four screws under hood. look at
...s10 automatice 6cyl by removeing bed. Had power prior to removal now no power to the grey wire at pump. any ideas? Tested grey wire again but this time used the frame as my ground, had power now. ...
...S10 Tail Light issue Bed of vehicle was removed to change fuel pump and replaced. When everything was put back together, we ran across a very screwy issue. Brake lights work when the lights are not ...
...S10 2.2 engine Remember daily driver Start by undoing the air filter housing hose that goes to the shroud with a flat head. basic lol Don't forget to unclip the sensor on the bottom of this hose. ...
Show image of the were the bolts and the clips that bolt on the front bumper of a s10 Chevy Remove the grill and they are much easier to locate and remove.
Question about Chevrolet S 10
...s10 had a dysfunctional horn I had to remove the airbag from the steering wheel to access the wiring harness to the horn and i had a broken wire that caused the horn not to work I replaced that and ...
bumper. I would think that it would only need to be activated for long trips into the bush (not in the city) So, I would put a switch on the dash with an LED to show when it is turned on. Pick up +12
1,037 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
686 Questions
620 Questions