1999 Chevrolet S-10 Pickup "clutch transmission" Questions

...clutch. Also it would not hurt to check your transmission fluid or better yet service it to replace the oil transmission fluid with new fluid. You'll find the fill and drain bolt at the side of the ...

...Clutch slave cylinder on the transmission, or, one of those 2 parts is defective. Check under the clutch pedal on the floorboard to see if you can identify any clutch fluid (same as brake fluid for ...

...transmission. You have a clutch failure either in the clutch itself or in the master/slave cylinder. Take a look where the slave cylinder goes into the transmission and have someone push and release ...

By separating the gearbox from the engine and then unbolting the clutch. Remove the bell housing bolts from engine,the clutch will slide off the transmission and stay with the engine when it comes out

...clutch release fork, between the motor and transmission, need to remove the inspection plate on teh bottom of the bell housing (if rquiped) to see it. 1,2,3 are fairley easy to replace. Number 4 ...

...transmission needs the clutch bled. How do you access the clutch slave. I was under the truck and cannot figure out how to access it. THanks PArker do you know where the clutch fork is?the "slave" ...

...clutch on your transmission. The reason that your transmission is not going  in to gear right is that the fluid is to low to push the throw out bearing to disengage the clutch fully.  Once ...

Transmission component slipping". A very common problem with these transmissions which sets a P-1870 is 2 valves in the valve body, the TCC regulator and isolator valves. The reason for the problem is

...transmission, new flywheel, new clutch and clutch plate, new Master and Slave Cylinders. Have bleed the system to the point I get great shifting and all. However, my problem is in first gear and ...

...transmission my clutch pedal doesn't have any pedal. I changed clutch master cylinder and slave cylinder also changed clutch and pressure plate and throw out band. I still cant get any pedal. I ...