1995 Chevrolet K1500 "remove pitman arm chevy" Questions

Ad

...pitman arm. What is the way to remove the old one. I don't have the room to use a pitman arm puller on it. Do I have to remove the steering gear box ?? Take the bolts out that attach the steering box ...

Ad

...remove because pitman arms rarely go bad. It's usually the center link that fails.It will take a lot of  strength to remove and you may want to use a little penetrating lube on it. Once you ...

Ad

...remove the pitman arm and turn the gear box so that it turns more to the right. it has slots so align it on the next slot to the right. they make a tool that they call a pitman arm puller that raps ...

...remove pitman arm. Remove snap ring with snap ring pliers & washer. Fill p/s pump with fluid. Place large pan under gear box (to catch fluid) Start truck turn steering wheel hard all the way to ...

Question about Chevrolet 1500

1 Answer

...pitman arm & idler arm on my 1/2 ton chevy. never done it, told it can be quite a job. where to start? any special tools needed? general instructions? Don't worry it is not too hard if you keep at. ...

Question about Chevrolet 1500

1 Answer

...what gaskets and seals to get or where can u help me thanks pitman shaft seal kit is what you need. the large nut is removed then a puller to remove the pitman arm off. then the seal can be ...

...Remove the Front Tires. Check the following: 1. CV Joints. Are the boots in good shape or are they missing? Any unexplained "clicking" sounds recently while turning left or right? TIP: instead of ...

...remove the pitman arm from the steering gear, then use the tie rod seperator to remove the end from the center link. Reinstall and retighten nuts, do not leave out the cotter pin. Idler arm will ...

...shield, remove three bolts from the side of the frame holding the gear box onto the frame, you will need a puller to remove the pitman arm off the gearbox, reverse procedure to install. add

...remove the steering box to do a pitman arm. Take off the one 1/4 in. nut, or whatever size it is, take the nut off the center link, put a pitman arm puller on the steering box side, and tighten the ...

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

845 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...