1983 Chevrolet Silverado "1984" Questions

how to take a stub shaft off a 1984 turbo -350 transsmission stub shaft how to remove and replace it with 2'' longer stub shaft I have 2 transsmission 1 stub shaft is 2" longer then the other stub ...

...diagram that shows what the fuse names are where they go i need a fuse box wiring diagram for a 1984 chevrolet silverado Attached is the best view I could find. Hope it helps. Let me know.

1984 chevy 1/2 ton ingniton is dead have had starter and altinator checked have power going through the 2 inline fuses of the starter where is the ignition fuse located check the coil with key on, ...

Can somebody tell me the best and easiest way to take out the heater coil in my 1984 silverado 3/4 ton pickup? www.ehow.com/how_4521299_replace-heater-​core-chevy... - Cached

Where is the fuel filter on 1984 Silverado 4x4 pickup with a 305 cid? If you have the original quadrajet carb it has a small inline fuel filter located on the front of the carb. This applies to both ...

gauge goes WAY past full when started and tank is not close to being full, checked fuse its ok. 1984 c10 silverado this problem is caused by a defective fuel tank gage sending unit check your grond at

What is the stock camshaft in a 1984 chevy K10 pickup? If you call a NAPA auto parts store and give them the engine size and make and model,They can give you that info. 1/2 inch lift top riser on the ...

I have a 1983 silverado that my dad bought in 1984. I want to restore it to like new or better than new condition. How can i find a shop or mechanic to do this work for me? You can find them under ...

...stearing sector, now it does not steer correctly....feels like there is no power stearing fluid...1984 chev k10 series Sounds like you may have a bunch of air in it. Make sure it's full of

I have a 1984 Chevy Silverado V6 2 wheel Drive. I replaced the fuel filter, since then it continues to leak gas at the fitting to the carb. Have bought 2 rebuilt carburaters and the same thing, it ...