1995 Buick LeSabre "replace door window motor 95" Questions

replace a good motor? Do you have voltage coming to the switch on the correct terminals? How about a broken wire in the harness near the door? Hard to work on any electrical by guessing at nothing You

door panel,to get access to the motor.remove the motor and window regulator together,DO NOT take the motor off without taking them out together.Place the window regulator in a vise(very important) get

...replace the motor without injuring myself would be appreciated. When removing the door panel, you need to remove all of the screws first. Then pull the door panel off. There should be screws around ...

...door power window will not work. I have replaced the motor and I have taken apart the master window switch and cleaned the terminals. Looking for the relay fuse for the drivers window. All the other ...

...Take the inside door panel off check for B+ voltage to the switch ! How To Install Replace Door Panel Ford Explorer 95 01 1AAuto com How To Diagnose your Power Window Problem Is the Switch or motor ...

...window motors in both doors of my '95 Firebird. I'm having trouble removing the door panels and I am unsure of where to go from there. Please help! Most door panels have screws in places like armrest ...

door. The fuse for the window is on with other things and the other things listed that are on the fuse with the power windows work. Maybe the switch is bad. Power windows plug into something, which is

...door and it worked for a day this relay is only on the 93 and 94 95 is different so i wonder if there is some sort of problem that was figured out. I don't know if it is worth changing the motor on ...

...the switches first but to tell you the truth all 95 firebirds and camaros are notoriuos for power window motor problems, ihave a 95 Z28 and my motor is out on my drivers door too, they cost about

...you will need to replace the motor soon or it will die again. If it doesn't work, make sure the switch is working properly. Or take the door panel off and see if the problem is the regulator