1990 Buick LeSabre "replace ignition module" Questions

Ad

Question about Buick LeSabre

1 Answer

...ignition coil(s) from on top of the module...(leave plug wires attached)....and set aside noting coil position on module....unplug module and replace with a known working module.If there is grease ...

Ad

ignition module. It still won't start. What could it be? Replaced the fuel pump a while ago, just replaced ignition module. Still won't start. Could it be a bad fuel pump? It surely could be. Ignition

Ad

...control module). Now if there is no power to one of the ignition coil pack youll have to replace the ignition module, It will be in your interest to replace that coil that has no power to

...coil and cause the new module to fail. Good luck, hope this helps out a bit. The ignition module is under the coils. It is what the coils plug on to. To replace it removal all the coils and unplug

Question about Buick LeSabre

1 Answer

...ignition module has been replaced thats weird mmmm make sure than you have power going to the black and pink wire or pink with black stripe wire when you turn the ignition on, i don't know what else ...

...noise 5) Faulty or incorrect ignition module 6) Faulty ECM If the number 1228253 is on the ecm replace it they are trash. Why did you replace the Ign. module? What was wrong with it before? ...

Question about Buick LeSabre

1 Answer

...ignition module has 3 coilpacks on it and the front one is not fring at all so it is skipping on those 2 cylinders. I replaced the coilpack and it still would not fire. I took the ignition module and ...

Question about Buick LeSabre

2 Answers

replace ny 1995 buick lesabre ignition control module ... the ignition control module is mounted to the left cylinder head. more precicely, under the 3 coils Remove coils , remove harness bolt, unplug

...ignition module might not be the real problem. This time there is no check engine light on, but won't start again. Before I get screwed out of another $500, I need to know the possibilities of why ...

Question about Buick LeSabre

1 Answer

...replace an ignition module. 1995 buick lasabre loosen 7mm bolt retaining wiring harness connector to ign. module remove the three nuts on underside of ignition module to the bracket i think they are ...

Not finding what you are looking for?
1990 Buick LeSabre Logo

531 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...