1990 Buick LeSabre "ignition coils keep" Questions

ignition coils going bad, and the electronic ignition control modules - for which there is a testing procedure - (any Haynes manual will tell you, I believe) - as well as a test procedure for the coil

...ignition keep the car from staying started if the ignition is bad it will turn over for just a second then bog down seems like its out of gas but i have half a tank just changed fuel pump coil packs ...

located under the ignition coils.This is where the plug wires go on to.You should check for codes.Even if the check engine light did not go on there could still be some codes.Hope this helps.Good luck

...ignition coil, the map...the egr...pcv or the CIA...Trying to keep my sense of humor...Please help me with this off and on problem...Thanks Sounds like the ignition module that sits under the coil ...

keep on cracking when the car is being used After the porcelain spark plugs are changed they crack after the car is in use. The sparkplugs have been changed properly Is the porcelain "cracking" or are

...ignition coils causing a misfire. Hard to e sure without putting on a scope. Check ignition coil,, for that cylinder. run a can of BG k 44 thru the next tank , check compression on that ...

...said it is a fairly common problem that is misdiagnosed all the time. hope this helps. have your ignition coil packs tested thats one of the common issue when one goes ...

...coil and cause the new module to fail. Good luck, hope this helps out a bit. The ignition module is under the coils. It is what the coils plug on to. To replace it removal all the coils and unplug

...is located on the lower front of the engine. If you're not sure of it's exact location, you can trace where your spark plugs wires go. They lead to the coils, which are mounted to the ignition