...oil pump in 94 grand am replace oil pump the 2.3 and 3.1 engines need to drop oil pan.for the 3.3 engine you have to remove timing chain cover.you have to remove oil filter adapter the pressure ...
...the wrong position, or the oil pump drive (at the top left side of engine) was not fully engaged onto the cam gear. Its not necessary to remove it to replace head gaskets. Good luck or get back to
...oil pump inside the converter. Have this verified by a transmission repair shop. if you find out what the problem is i am curious to know the answer. I just also replaced my pump and thermostat. ...
...oil. Ran great for a few days then started stalling. Then replaced plugs and fuel filter. Could this be caused by a faulty MAP/O2 sensor or even worse the cat?? IT COULD BE THE POWER STEERING PUMP ...
pump the gas but i'm not. The RPM's jump up and down a bit while i'm giving normal gas to speed up. If I stay steady I have no problem, only when I give it gas. If I floor it, it kicks to a lower gear
pump the gas but i'm not. The RPM's jump up and down a bit while i'm giving normal gas to speed up. If I stay steady I have no problem, only when I give it gas. If I floor it, it kicks to a lower gear
Question about Pontiac Grand Am
...oil in tank, the pump is knocking my mechanic mistakenly put some gear oil in the fuel tank, the tank was cleaned and the carburetor was flushed, the engine and carburetor are working fine but the ...
Question about Pontiac Grand Am
...oil pump on a '97 Pontiac Grand Prix 3.1L V6? I just finished replacing the harmonic balancer on this vehicle. Upon completion the car started normally and revved up as usual. I left it running and ...
Question about Pontiac Grand Am
...oil pump Removal Procedure Remove the engine front cover. Refer to Engine Front Cover Replacement . Remove the oil pump cover bolts. Remove the oil pump cover. Mark the inner and the outer gears in ...
...OIL PUMP NOT WORKING THE CAR CAN START BUT NO OIL PRESSURE, IT SEEMS MY NEW OIL PUMP IS NOT WORKING, PLEASE HELP New oil pumps will not work until they are primed . Pull the pump and remove the gears ...
2,020 questions posted
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,208 Questions
1,285 Questions