2000 Mazda Protege "bad ignition module cause hard" Questions

Ad

...some feedback. usually a running problem when a car is hot can be caused by a bad ignition module. next time it wont start check to see if you have spark. if not i would try replacing the

Ad

bad ignition module. They aren't too hard to replace, but you need a special tool. The module is located on the distributor stem at the back of the engine. Its held on by two small screws that need to

Ad

Question about Mazda Protege

1 Answer

...bad ignition wires. There can also be a bad ignition module or pick up.Also it can be low battery voltage related issue.This all has to be checked to confirm the fault.Getting the car scanned at car ...

...all. Vacuum leaks, tune up parts, bad ignition module, clogged cat converter or muffler, low fuel pressure, leak between MAF and throttle body, bad coolant temp sensor, leaking head gasket,

...bad - easier to replace complete intake from scrap-yard then to pay $100.00 for new injectors each! 6. Coil-pack on ignition module could be cracked and may need to be replaced. These are only ...

...ignition control module and coil. you may have bad or very dirty fuel injectors causing too much fuel into the cylinders causing rough running and smell of gas. do you have a fuel leak or too high ...

Question about Mazda Protege

1 Answer

...ignition coils and module, bad spark plugs faulty crank shaft position sensor,timing belt slip timing or broke,faulty ecm and theft security shut down.intake leaks, faulty idle air control

...this can be caused by many things. Could be as simple as changing the fuel filter, or a bad ignition module, fuel pump, air mass control sensor, etc. It will be hard for anyone to guess it ...

Question about Mazda Protege

3 Answers

...ignition modulator too, the modulator is what the coils sit on.  Its unlikely but,...... Has happen before that you got a bad coil from where ever it is that you bought it from, I have heard a ...

Question about Mazda Protege

4 Answers

...ignition module go bad? Heat is the biggest issue. When replaced, new heat conduction grease must be installed, or much quicker failure. Anything from vibration causing a cracked case that let water ...

Not finding what you are looking for?
2000 Mazda Protege Logo

576 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...