2002 GMC Yukon XL "arm remove windshield wiper" Questions

Ad

Question about GMC Yukon XL

1 Answer

...arm i can't remove the windshield wiper arm from my 2002 gmc yukon.i removed the nut ,but arm will still not come off. These are a tight fit...Spray a little penetrating lubricant onto it and let it ...

Ad

Question about GMC Yukon XL

1 Answer

...and pivot shaft (17566) assembly; refer to Mounting Arm and Pivot Shaft . Remove the windshield wiper motor (17508). Remove the output shaft bolt. Remove the bolts. Remove the windshield wiper

Ad

...arm clip , remove left windshield wiper mounting arm and pivot shaft and windshield wiper blade assembly. Remove left windshield wiper adapter and connecting arm clip access cover. Remove left pivot ...

Question about GMC Yukon XL

1 Answer

...arm. Remove wiper motor crank arm brackets. Remove three bolts and windshield wiper motor from vehicle. To Install: Install windshield wiper motor and three bolts. Torque to: 62 in lbs. (7 Nm) With ...

...Remove the mounting arm and pivot shaft retaining clip. Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor. Remove the windshield wiper motor. Disconnect the ...

...arm. Release the locking tab. Remove the windshield wiper pivot arm. NOTE: During installation, it is necessary to pull the locking tab out to its full open (unlatched) position and hold while ...

Question about GMC Yukon XL

1 Answer

...Arm To Remove: NOTE: Mark position of wiper blade on windshield to ensure proper position upon reassembly. Remove washer hose. Lift wiper arm from windshield and use a screwdriver to disengage ...

Question about GMC Yukon XL

1 Answer

...arm and pivot shafts are an integral part of the windshield wiper and are serviced as one unit. Removal Disconnect the battery ground cable (14301). Refer to Section 14-01 . Remove antenna mast from ...

...arm. Remove the pivot arm nut cover. Remove the nut. Remove the windshield wiper pivot arm. Raise and support the hood (16612). Remove the cowl grille seal. NOTE: The two cowl grilles overlap at the ...

...arm attachment for re-installation alignment, Remove rubber seal and plastic screws (Phillips head), remove windshield wiper water line from left side, then carefully remove plastic cowl. Under neath ...

Not finding what you are looking for?
2002 GMC Yukon XL Logo

824 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...