...BRAKE LIGHT IS SHOW Check for power at the turn signal switch. White wire comes from brake switch switch into the turn signal switch. The brake light switch is working because the high mount brake ...
...brake light at top works. brake lights on bottom left and right don't work. It was hook up to trailer wires connection. going down the road and when you turn on the right turn signal the cruise ...
brake lights won't work Check bulbs. If ok, check fuse. If ok. check brake light switch on brake pedal. If ok, the brake light circuit goes through the signal light switch and it may be defective
daytime lights don't work low and high beams work, but daytime lights won't make sure the parking brake is fully disengaged. running lights wont work if the e-brake is pushed down one or more clicks.
2000 gmc safari van brake lights can't get brake lights to work What have you done to try and correct this? Has the brake light switch been tested? Are the fuses OK?
...lights but all the others work. checked fuses and connections and bulbs Check up under the dash on the brake peddle arm for the brake light switch.Check to see if it is loose or if the switch is
my brake lights, turn signals and hazard lights aren't working. My brake lights, turn signals and hazard lights stopped working. I assume it would be a fuse but the fuse box under the hood ...
brake light not working could this be fuse? If its just one, it would be the bulb. If both are out, yes you have a blown fuse. Look for fuse block under dash of drivers side for brake, signal, dash ...
Question about GMC Safari
... Why did brake lights, rear hazards, and rear turn signals stop working? All front lights work. Replaced bulbs, fuse is good, still not working. Check the sockets for power and ground with a volt ...
no brake lights turn and running lights work its your brake light switch takes about 10 min too change
304 questions posted
Usually answered in minutes!
316 Questions
254 Questions
265 Questions
207 Questions
200 Questions
