1997 Volkswagen Jetta "check starter solinoid short" Questions

...starter relay is in the truck. The starter solinoid is on the top of starter. Short the two large terminals on it, if the starter turns then the solinoid is faulty. If not then the starter is

...starter. try taking it off and check to see if u can turn it. see if there is anything broken and laying inside of it. check to make sure it still has some brushes. if it smell real burnt the replace ...

...starter without removing f.i. unit. Any place to check besides clutch safty switch? Thank you for your time & thoughts on my requist Never wash engine in zr-1,starter is in center of engine,drain ...

...my interior but not to my starter, solinoid or coil in between that could be shorted out or stopping current? Check for burnt fuseable links at the starter solenoid. Also check park-neutral

...starter and solinoid, everything works with key in on position, when key is turned to start the ignition fuse (40 amp) blows and you can hear the solinoid click, the engine turns by hand. I believe I ...

check the wires on the starter to make sure they are not melted, shorting power to the solinoid down there. (the small wire on the starter solinoid is the trigger, and should only get power when tring

...? IN THIS WIRE THERE IS A FUSEABLE LINK CHECK IT IF YOU CAN SHORT THE SOLINOID OUT ON THE STARTER AND THE CAR TURNS OVER THE FUSEABLE LINK IS BAD IF EVERYTHING IS GOOD CHECK TO SEE IF THE MOTOR IS ...

...starter relay, I think I shorted something out. I now hve NO power anywhere. No lights, no bells, no clock, no horn, no nothing. You may not have the wires in the right spots on the solinoid, i have ...

...check the starter next, but I'm not sure where the starter is or exactly what it looks like... it looks like this if your car wont turn over is a possibility, that the starter is bad, try to hit the ...

...CHECK STARTER SELENOID COULD BE SHORTED OR SINGNAL WIRE RUBBED TRUE AT STARTER 12 VOLT BATTERY FEED check the starter were the wires hook into. the small ignition wire should not have power with the ...