2003 Mazda Mazda6 "2 front bumper removal" Questions

Ad

...2. Raise the car on jack stands, and remove the front wheel (passenger side) . 3. Remove the screws on the bottom of the wheel well. (This is under the front bumper, four screws). 4. Remove some ...

Ad

Question about Cars & Trucks

1 Answer

...front bumper removal Remove the 2 6 mm bolts that attach the bumper to the front corner of the fender. Remove the 2 6 mm nuts that attach the bumper to the frame in the front of the car. Remove the 4 ...

Ad

...2, 7mm bolts of the front bumper that are now visible up near the outer edge of the headlight assembly.4. At this point I removed the bumper’s top edge start bolts and bottom edge 7mm bolts about 3/4 ...

Question about Mazda MAZDA6

2 Answers

...2 . Look under the edge of the front of the car at the end of the bumper. Pull the plastic shield down out of the way if it doesn't come off completely. Reach behind the bumper at each corner and you ...

...2. Remove the left-hand front wheel. 3. Detach the fender splash shield from the bumper cover and fender (both sides). 4. Remove the air cleaner intake pipe retaining clip. 5. Detach the air cleaner ...

Question about Mazda MAZDA6

1 Answer

2/ " the front of both inner wheel liners. 3/ " a 10mm bolt at top behind both marker lights. 4/Remove 2 10mm bolts above both headlight assemblies. 5/Cautiously withdraw bumper then disconnect bumper

Question about Mazda MAZDA6

1 Answer

...2 Front Compartment Sight Shields (Qty: 3) Tip Each front compartment sight shield is serviced separately as needed for repairs http://gsi.xw.gm.com/image_en_us/gif/000/001/728/1728611.gif Callout ...

Question about Mazda MAZDA6

1 Answer

...2 T30 screws in the front wheel arch liner (bumper side) and then you will be able to see a 10mm bolt reversed into a bracket at the top of the bumper from a inside veiw, remove and repeat for the ...

...2 T30 screws in the front wheel arch liner (bumper side) and then you will be able to see a 10mm bolt reversed into a bracket at the top of the bumper from a inside veiw, remove and repeat for the ...

...2 bolts and the nut. ... To install:. Toyota Tacoma Retainer, front bumper filler, no.3 Toyota Parts Direct https://www.toyotapartsdirect.ca > Toyota__Tacoma RETAINER, FRONT BUMPER FILLER, No.3. This ...

Not finding what you are looking for?
2003 Mazda Mazda6 Logo

705 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 6
2004 Mazda 6

738 Questions

2005 Mazda 6
2005 Mazda 6

386 Questions

2006 Mazda 6
2006 Mazda 6

293 Questions

2007 Mazda MAZDA6
2007 Mazda MAZDA6

74 Questions

2008 Mazda MAZDA6
2008 Mazda MAZDA6

48 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...