How do you take bumper off a ford puma?

Hi Robert,

Please watch videos below and I'm sure it help you !!

https://www.youtube.com/watch?v=JTQLDfumlBw
https://www.carid.com/ford-sport-trac-rear-bumpers/

regards,
Sonu

Pop the Hatchback open and remove the connectors
from the top of the bumper cover.

Optional Step: Using a Floor Jack, raise both sides
of the car in the back, supporting both sides with
jack stands, and remove the rear wheels.

Using Torx Bits, remove the inner rear wheel well
lining.

Get behind the rear wheel well and loosen the bolts
holding the bumper brackets on. They're pretty
difficult to find and remove. Be Patient. Do the
same to the other side.

Remove the rear bumper cover by pulling the cover
outward from the part nearest the wheel on both
sides. Once removed, take off the 2 black mounting
brackets from the bumper cover.

Good Luck

There are 4 bolts (upper) that fixes the bumper, under the bumper, there are bumper sliders as well as the sides. Remove the 4 bolts, fender linings and slide off bumper clips from the sliders

Did you find a solution? I have the same problem with my puma?

its not the bumper

Your piece on a similar problem with a speed sensor on the gearbox of a Ford Focus solved te problem. The AA did not have a replacement sensor but advised, you could check your speed using a sat nav.
The dealer who supplied the car, Thrapston Ford, have agreed to supply & fit the part free of charge.

piece of the proverbial to change its the same as an escort to do ,parts ?? well depends where you are in the world but any ford dealer can supply one

https://www.google.co.uk/search?ei=Jqc2WpLaOKyRgAaKqZjICw&q=ford+fusion+front+bumper+removal&oq=ford+fusion+front+bumper+re&gs_l=psy-ab.1.2.0l3j0i22i30k1l7.276489.295506.0.297756.27.16.0.11.11.0.101.1147.15j1.16.0....0...1c.1.64.psy-ab..0.27.1295...0i67k1j0i131k1.0.IUd0epgXsAg#kpvalbx=1&spf=1513531445795

sensor ,go to ford garage