1999 GMC Jimmy "replace door bushings hinge pins" Questions

door hinge has removeable pins and bushings replace them, otherwise replace hinge. Also you might jimmy it by loosening latch pin and move it upward and retighten. several attempts may have to be done

...door and support it from the bottom, and then go for it, one pin at a time - for the upper pin, compress and remove the small spring, drive out the old pin, drive in the new pin and put the spring ...

...replace, with the hinge spring being the most difficult part of it. You can leave it out if you wish, but to reinstall it requires a special tool(another $8) to compress it and get it back where it ...

because the pins in the bushings are worn. It's a common failure point on many GM vehicles. The hinge pins, bushings door check roller and spring can be replaced at most body shops for about $150-200

...replace). thanks the door problem sounds like the door pins and bushings are worn out. this should be fixed asap because if it is let go the pin will cut into the hinge itself and then they may also ...

...replace door hinge pin and bushings DO ONE AT A TIME DRIVE THE PIN OUT AND THEN MOVE THE DOOR AROUND A PULL OUT THE BUSHINGS NOTE TWO SIZE BUSHING PUT THEM IN THE RITE HOLE DO THE SAME FOR THE OTHER ...

doors are heavy and from wear and tear the circular holes become oblong. you can purchase a replacement set of door pins and bushings from autozone to repair the oblong holes and the door misalignment

bushings and now the door is too high and rubs on the striker plate. It will close but it is much more difficult to open. I have seen the posts where people jack up the door if it is too low, but mine

not catching door panel loose. how to fix? sounds like you have a problem most jimmy owners have but to an extreme, the most likely cause is that the door pins and bushings on the hinges need replaced

...bushings on the door hinges are worn. This could be a project that you can tackle with the help of someone to manipulate the doors as the pins and bushings are replaced. You can accomplish this with ...