1998 GMC Jimmy "ignition sense" Questions

1998 jimmy will turn over but wont start check that the crank position sensor is ok as it has to work to sense the correct time to allow ignition and spark

...ignition switch to the run position, then pull and replace "repetidly" the fuel pump fuse. You will hear a clicking noise from the correct relay. Thats IF you are trying to track it ...

...sense. WHat tests have you run and what results do you have? Fuel pressure on a vortec must be a stable 60psi. You need crank sensor at the pcm, spark, injector pulse AND flow thru the poppet system. ...

...it running with the doors locked so I don't have to try to get it to start again. Sounds like a bad ignition switch but could also be a bad connection to the ICP or just a plain old bad ICP ...

on my 2000 gmc jimmy if i start it every morning around 9 then in the evening around 5 no problem but if i miss either one or its later it is hard hard to startany ideas Change the battery robert or ...

ignition dielectric grease. Use grease on new parts you are replacing also. Sometimes the grease you add causes the boot to seal & air in the boot pushes the boot back off a little. The boot needs

...performs diagnostics checks on itself and other parts of the electronic shift system when the ignition switch is in the run position. The following are different types of system checks that the ...

...for clarity. Question moved from Televisions category. The ion sensing module is another name for ignition control module its function is to energize and de-energize the primary ignition coil in ...

sense ignition. The ICM provides a synthesized cam signal to the PCM based on these inputs. The PCM uses the cam signal to synchronize fuel injection. This system consists of the following circuits: •

...Ignition Switch Control Module in Driver Fender Well Car Speed Sense Wire: Gray/Black Car Speed Sense Wire Location: Pin #3 at PCM Mounted on the Firewall Car Parking Lights Wire (+): Brown Car ...