2004 Pontiac Montana "replacing power steering pump" Questions

replacing your power steering pump. Good luck. REMOVAL AND INSTALLATION Disconnect the negative battery cable. Disconnect and cap the power steering pump hoses. Remove the accessory drive belt. Remove

...power steering hose replaced and the 2008 pontiac montana is whining like it was when there was no fluid in it what do I need to do to bleed the line? I think you damaged the steering pump by driving ...

...power steering pump Remove the belt, there are 3 bolts that you have to remove through the openings in the pulley. Remove the power steering lines from the hold down bracket on the left lower side of ...

...power steering pump which the belt needs to overcome. If the belt is old ( had shiny sections, missing chunks ) it needs to be replaced. Also, if the belt tensioner is frozen, it may not be able to ...

power steering hose on 2003 Pontiac montana Very simple. Put the car on ramps. Remove the the fittings on both ends along with any clamps and remove the hose. Caution, these fittings can be very tight

power steering pump on mt 2000 montana and it keeps throwing the belt off..why? pulley on which belt is routed is worn out or belt is not original.But original parts and see if that makes a difference

power steering pump replacement 2002 pontiac montana how do I replace the power steering pump in my 2002 pontiac montana Remove the drive belt, remove the 3 mounting bolts by using a socket ththrough ...

...power steering went out. Van also lost power, was barely able to get it to a parking lot. Sounds like your serpentine belt either fell off or broke. Check all the pulleys to make sure they rotate. ...

...2004 pontiac montana?i have it all unhooked, but don't see how to get it out past all the stuff in the way. Do I have to remove the wiper assembly or the power steering pump? The wiper is the

high pressure hose on power steering pump 99 montana leaking Leaking high pressure hoses mean iminent failure get it replace as sonn as you can