2004 Pontiac Grand Am "creaking noise braking" Questions

creaking noise when I push down on brake pedal Noise associated with friction of the brake pedal to the stem of the mountings. Over aperiod of time there can be dirt or rust accumulating to tighten ...

...creaking noise under the dash on the driver side, it goes away if i accelerate or hit the brakes. it seems to be vacume related. could it possibly be the brake booster. It makes the noise constantly ...

creaking noise(s) from front wheels when braking. When braking I hear load creak creak noises from both front wheels. The pads & rotors are "ok" according too Meinike, There is also alot

creaking noise coming from driver side rear drum after replacement when coming to a stop my rear driver side drum makes a knocking/creaking noise. Rear drums and shoes were recentley replaced. Noise ...

...Creaking" doesn't cut it. You need to state WHEN and under WHAT CIRCUMSTANCES the noise occurs (standing still? going 40? going 80? brakes applied? brakes not applied? vehicle on fire?), and try to ...

creaking noise coming from my rear passenger drum only when im braking Most likely the slack adjuster is rusted. this doesn't keep the brake against the drum/rotor. Could be the bolts that go into the

creaking noise noise when taking off Also possibly a slightly stuck brake caliper, or on a long shot, a CV joint. But the CV joint would be more likely if it was making noise when turning. Could also ...

...noise, a creaking in the front passenger side when I brake. What is this noise? I just had my rotors machined and I put new brake pads. Everything worked well, no more vibration when braking. But now ...

...creaking'' noise from left front on braking when driving slowly, and occasionally of wide sweeping turns. Both side stabilizer bars were loose but cinching them up fixed exactly nothing regarding the ...

...creaking noise in the front end. When I brake, the creaking noise starts. Or if I go over a bump, the creaking noise is there. They have replaced the links, greased the links, replaced the bushings ...