1996 Pontiac Grand Prix "stalling problems" Questions

stalling issues I have a '95 Grand Prix 3.1L Recently it started sputtering when coming to a stop. I replaced the PCV valve and hose as they severely needed to be. That worked for about 3 miles and ...

starts and stalls 1999 Grand Prix - unless I keep the gas pressed after starting, it stalls. And when pressing the gas (tried driving it the other day) it seems to go sometimes but acts like it's ...

2001 Pontiac Grand Prix... 3.8 ltr stalling when in gear stopped stalling when in gear stopped. I am thinking I need a new oxygen sensor... Sound right? It does not stall when I put it in nuetral but ...

...Check seals around doors and windshield. As for the stalling, it could be a lot of problems. If you intend to keep the car, I would suggest you purchase a repair manual. Cost about $20-25

car stalling Mine started at that same point. Run fine when it was cold and then stall when it got to temp. Now it stalls even when it is cold. When a scanner was hooked up to it, the code said ...

MOTER STALLS WHEN AT RUNNING TEMP AND IDEL I HAVE A 93 GRAND PRIX 3.1 LITTER IT RUNS GREAT IN THE MORNING BUT AFTER THE MOTER WARMS UP IF I COME TO A LIGHT OR STOP FOR TO LONG THE MOTER STALLS AND I ...

stalls when put in gear stalls when you put it in drive unless i gun it. runs great otherwise lock up solenoid in trans may be your problem idle is low for load.... or torque converter is failing..

Stalling. starts 15 minutes later. runs good for a week. I have a 2006 pontiac grand prix. 85000 miles. 3.8l engine. engine stalls then will start up 15 minutes later. Once it hesitaded last week but ...

99 Grand Prix GT stalls when MAF is connected My 99 Grand Prix GT was running fine and then when I turned it off and tried to start it when leaving somewhere, it wouldn't work. It was like it would ...

...problems. The biggest problem is it is stalling because of it idles irregular. It'll go high like to 3 or 4 X1000 Rpm, then die out. Sometimes it recovers and not stall but the rpm gauge will quit. ...