1991 Nissan Pickup "cause low beams work" Questions

...low beam headlights do not work on my 1991 nissan truck. The high beams work fine. Does anyone know what I can check or what might be causing the problem? I appreciate any help I can get. Thanks, ...

...beams work and both low beam bulbs work on Daytime Running Light mode. Just low beam on passenger side goes of 2007 Honda accord 4 cyl. Low beam doesn't work. New bulbs on both sides. Both ...

...low and high beams. i replaced the high beams with 100w blueish bulbs and they work fine. When I replaced the low beam bulbs, the low beam bulbs would go on for a split second and then turn off, not ...

on they work, the low beams would not. i kept turning the switch and the low beam lights eventually turned back on. What could cause this? Faulty cable to lights, bulb dying, light knob going out, ect

...headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don't work or low beams don't

...cause of the low-beam issue, please use the free car diagnostic tool at your local autozone in order to get a read out of your system. Then, they'll be able to let you know which was most likely the ...

...low beam? If not work back from there, check the ground for good contact, how did you check the bulbs? Sometimes when one goes the jump in current causes the other one to burn out. Try flipping the ...

the car back to where the repairs were done, cause I think the problems are from the damages. I was informed today that there's no juice from the fuse box to the low beam switch. What would cause this

low beams would not come on, thankfully both hi beams worked. I checked the regular fuses under the hood, but not the large black ones. Can you help? Thanks, Phil If the high beams work it's not a

...go out. My high beams and my parking lights work fine when they are out. After a while, the low beams will go back on but then go back off again. cause your dimmer switch is bad! you need to change ...