2002 Chevrolet Malibu "rusted brake light bulb" Questions

Ad

Question about Chevrolet Malibu

1 Answer

...brake circuit boards... nothing. What else could it be? You can look into the tail light assembly through the small holes in the inside at the medal bands to look for corrosion or rust. The seal in ...

Ad

Question about Chevrolet Malibu

2 Answers

...work correctly first that can eliminate the brake light switch from the equaition your fuse is fine the blinker is flashing quick to let you know a BULB BURNT OUT and needs to be

Ad

...brake lights will flash during this ocurrence, but very dimly on both ther left and right sides. I replaced all bulbs on the left rear (2 of #3057 and 2 of #3156). It does not look like the front ...

...brake light bulbs, there will be one that is connected to the body of the car. that will be ground Check your Stop Lamp Switch behind your brake pedal and see if it is broken or adjusted too far

light bulbs still work. HELP! there is a switch with the brake pedal.pls check it. some times the bulbs do not get earth connection due to rust gathered on its base. check the rust first clean it then

Question about Chevrolet Malibu

2 Answers

ground connection is rusted or loose. The fuse generally covers all rear lights. well there is only one bulb for the brake and tail light. i put a new bulb in a few days ago and it burnt out already..

brake light bulb is rusted and wont come out how can i remove it Disconnect battery cable,get rag,place over bulb and turn,break apart and get all out of socket and scrap rust out and try new bulb. Go

Question about Chevrolet Malibu

1 Answer

...brake lights Check Fuses First, Remove both tail light, remove Bulb plug from it's socket, remove each bulb, check if there's rust or corrosion in the bulb socket if so clean them, check wire for ...

Question about Chevrolet Malibu

2 Answers

or bulb sockets could be rusted or loosly connected. Hope this helps. There's a switch on the brake pedal arm that controls the brake stop lights, that needs adjustment or replacement. Hope this helps

...brake light circuit goes from the stop switch (Located up above the brake pedal) through the headlight switch, through the light bulbs to ground. The tail light circuit goes through the headlight ...

Not finding what you are looking for?
2002 Chevrolet Malibu Logo

1,276 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...