2000 Chevrolet S-10 "exhaust donut gasket" Questions

...to seal at the collector , it may be hard to c it cause it will be dirty n greasy and could look like a solid piece of the exhaust , but its a donut shaped ring that slides over the end of the

...exhaust donut gasket in Remove the body harness for the exhaust closet to the dounut. this should give you enoun slack to move the pipe. Assuming your clamp bolts will loosen. Loosen bolts on the ...

...to the engine.whats the name of the part that connects to the manifold? donut gasket. or flange depends on the setup. it may have a flex pipe my 2000 s10 had a exhaust leak an thats what it ...

...other sound like it seems to be under a lot of pressure, or if the donut gaskets at the exhaust manifolds are leaking/ blown out, then there you go, to the muffler shop. the converter can cause it ...

the intake manafold. what could it be. its the exhaust manafold gasket or the donut gasket in the exhaust pipe, proably the donut gasket.. its a part you can pick you for about $15.. good luck keith..

...notice the sound more when you accelerate? If yes, then it could be either the exhaust manifold gasket or the donut gasket. The donut gasket is where the exhaust pipe connects to the exhaust

...drop the exhaust system where the pipe meet the exhaust manifold. After putting it back together the exhaust isn't as silent. Is there a gasket or donut the culprate? Donut gasket. You need 2 of

...gasket? heat you heat up the studs on exhaust manifold take em off while cherry hot let every thig cool off then put new donut gasket in re seal all exhaust sometimes pb blaster will loosen them

...exhaust pipes, thus creating the need for either a flange, or donut type of gasket to join the connections together. The most common place of use for the gasket, is below the exhaust manifold/header, ...

is there a gasket between the exhaust manifold and exhaust pipe ,commonly called a donut the donut is cast into the exhaust manifold.