1998 Chevrolet K1500 "break fluid" Questions

...break fluid goes I cant seem to find where to put the break fluid never seen one of these vehicles so i can only advise,try looking on the firewall near the top and look for the servo unit it should ...

...break paddle99 Chevy We bled 7-8 times starting at the rear and all the way around Sounds like you may have an air bubble in the master cylinder. The most effective way to deal with that is getting a ...

...cylinder went out. Replaced master cylinder and flushed out all of the bad fluid. Now the front breaks are locking up when applying medium to hard pressure. What could be the problem and how do I ...

...at the master cyl ,crack open break line that is at the front of master cyl, then you know push down tighten then up /down /up /down. once you get fluid to that point tighten,and try at rear

...break doesn't work either. someone told me that it was the box under my hood that the lines go int..could u please help me?? i have had it to 3 dealers ships and no one could figure it out... please ...

...the dash comes on when the brake pedal is applied,like a panic stop. Usually the light comes on because of air in the break lines. check fluid level check rear cylinders they leak often Blead out ...

. brakes 97 chevy K1500 pickup with 4wd. and I can't get brake fluid to the rear breaks. bad cylinders or brake hoses

I have transmtion oil in with my break fluid. what can i do? Flush the brake system emidiately. big problems.will need major brake repairs.any rubber component in brake system will need to be replaced

break light on dash Depending on which light, could be low brake fluid, or the parking brake switch, or other problem in the hydraulic system.

i have a 1990 chevy 1500that the brake light stays on in the dash break light stays on in dash add brake fluid and inspect for leaks or replace master cylinder