Where is the secerity module located in a 98 chevy cavalier its part of the computer
Question about Chevrolet Cavalier
98 chevy cavalier wont sart i moved the computer from its original spot on frame and remounted it inside the car. after doing so i tried to start the car and it started for a second and died. it would
Chevy Cavalier Took engine & tranny out of 97 and put into 96 Cavalier. Now when I turn the key, the starter will NOT engage. Need help figuring out what needs to be done. Thanks You will also need to
...chevy truck? Check the next diagrams for specific locations (clikc image for zoom), in all engines check C1 or VCM (Vehicle Control Module)... Fig. 30: Component locations-1996-98 5.0L/5.7L engines ...
...98 chevy van 3500 and found the wire going to one of the oxygen sensors had shorted out on the heat shield. Inspect the wires going to all of the oxygen sensors. On this van one of the oxygen sensors ...
...98 chevy when temps are in the single or negative digits, especially after sitting. The battery just does not have enough cranking amps at those temps. The truck sounds like it cranks fine but when ...
98 Chevy Vortec 5.7 NO SPARK I have a spark problem, I have replaces cap, rotor,plugs, wires, coil, coil pickup, ignition Mod, crank sensor, and still have no spark at the coil. Is it true that if the
...98-orifice-tube-location : <Regarding the location of the Orifice Tube> "It's in the liquid line that runs along the left inner fender well, under the brake booster. If you look closely at the ...
2,263 questions posted
Usually answered in minutes!
1,849 Questions
1,529 Questions
1,438 Questions
1,339 Questions
1,200 Questions