1994 Nissan Maxima "little gem" Questions

...little problem with your PW! Me too! Just a few Q's. When your windows weren't working, was it just the master switch that didn't work, or was it all of them? I've checked the fuse, even switched it ...

...little blue "chip" cover, or you have newer keys with buttons of any kind), then replacing the GEM is not really a DIY item, because the electronic key code signatures are stored in the GEM (and ALSO ...

...GEM module is located t the rear of the interior fuse box.The first step is to remove the trim panel that covers the gap between the upper side of the steering column and the dash. It just unsnaps ...

...little ways too - from the bottom of the plastic panel below the steering wheel up to where the relay box is, it's probably a good 6 to 12 inches. The box has a tab on one end - press the tab in, or ...

...little 6-7 hours sometimes takes days This has been to dealer kept for two days and couldn't figure out. They thought may have been battery, GEM or battery saver relays. I replaced all ...

...little car symbol showing a particular door as being open . You could have a GEM module problem , Or you could go to www.bbbind.com/ Find wiring diagrams an try to trouble shoot this yourself. Go on ...

...little computers into cars, gem stands for Generic Electronic Module. General Motors cars use the same type mini-computers and call them Body Control Module or BCM's. It is an extra layer of ...

...little.The GEM module can be found on eBay for a very reasonable price, around US$ 150.00 more or less. They are brand new with stickers and all still in place juust overstocked items. Just type in ...

...little. The GEM module can be found on eBay for a very reasonable price, around US$ 150.00 more or less. They are brand new with stickers and all still in place juust overstocked items. Just type in ...

...GEM) tested with a scanner and then get back to me with the fault codes, if I was to guess a part it would be the wiper switch it is fairly expensive so it's better to test first then replace parts ...