1983 Nissan King Cab "cylinder" Questions

...it is cabel check conectoins posible broken cable,,but i think it was hydrolic ,causes could master cylinder on firewall internal leak check fluid can leak inside under dash,also check slave cylinder ...

MISFIRE CYLINDER 1 I HAVE A PROBLEM WITH MY 1997 NISSAN XE PICKUP. MY CHECK ENGINE LIGHT IS ON AND I TOOK IT TO GET DIAGNOSED AND SAID THERE IS A PROBLEM WITH A MISFIRE IN CYLINDER 1. WHAT DO I ...

...shafts, but they never tell you to put them back. I will add that. To install: 6. Remove both cylinder head covers and loosen all rocker arm shaft retaining bolts. The rocker arm shaft bolts ...

I am having problems with the brakes on my 2WD Nissan. I bench bled the master cylinder and bled the wheels in the right sequence with a bottle and a piece of clear hose; however, the pedal is spongy ...

...pump on my clutch it want bleed so i can put in gear. You have to open the bleed screw on the slave cylinder to let the air bleed out. It is done the same way as bleeding brakes. If there is one ...

i have dropped the front 2 cylinders but the back to are fine. I can start the car and it idles rough. i pulled the no1 spark plug out and it is not wet so i believe it is working. When I go to ...

...case, you have run out of fluid in the clutch hydraulic reservoir located next to the brake master cylinder. If you lift the cover and it is empty, fill it with brake fluid. Get in the truck, lift ...

water spiting out # 3 cylinder could be cylinder head gasket gone, split in the head, loose spark plug or injector - don't know if this is diesel or petrol? Sorry run out of ideas, never had this ...

Need to know whether the 1983 Nissan 720 King Cab 2.4 liter 4 cylinder engine has a standard or electronic distributor.... Its a breaker style distributer

...shifter into gear 1986 nissan sentra Clutch need replacing? You've probably got a bad clutch master cylinder. Make sure the reservoir has fluid (usually takes brake fluid). If pumping the clutch ...