2006 Mercedes-Benz CLK 500 "cooling systems automobiles pressurized" Questions

We live in Austin, TX where the temperatures can reach 100-105 degrees during the summer. My 2007 CLK550 Cabriolet A/C will not adequately cool the car. We have returned the vehicle to the dealer ...

A/C not cooling, need a diagram for the high and low sides of the system and does it use r12 or 134a freon Hi, Low pressure side port is in the aluminum tube going to the accumulator ( an aluminum ...

...cooling fan for the condenser fitted We did it all the time on automobile systems from the 90's until the r12 vehicles were pretty much all gone you have to change the oil from mineral to POE as R134 ...

...motor and back pressure blows water out of reservoir tank If you are getting compression into the cooling system you either have a blown head gasket, warped or cracked head, or cracked cylinder

Greetings, I have an 1995 Geo Metro that has been out of gas for 2 weeks. When I went to start it, I put $10.00 worth of gas in it and it didn't start. It is possible that the fuel pump was damaged? ...

...sufficient pressure). You can have near sufficient pressure ("OK" pressure) and you can have cooling but your system knows if it is low or not. My AC worked fine, I thought. It cycled on and ...

...systems on your vehicle . Test the fuel system , fuel pump pressure an flow , testing electrical circuits with a DVOM - digital volt ohm meter . Eliminate thing's that are right . Find service ...

...(receiver/drier) and continues to the second heat exchanger (Evaporator). Here's how we get the cooling: Located in the high-pressure liquid line somewhere immediately before the Evaporator is an ...

...318, Is it behind the Fan or a seperate unit. is it easy to replace? if you are release air from cooling system then a cylinder heed or diphthong is busted 100% i had this exact problem and after

...tell the mechanic that a radiator hose is leaking; However, if the coolant level is low within the cooling system (due to a leak), your temperature sending unit may register a fault through your ...