2002 Chevrolet S-10 "signal light" Questions

...work runners work, any suggestions? check voltage from brake switch to signal light switch, signal goes from brake pedal to signal switch then to taillights, i suspect the problem is in that ...

tail lights not on no signals rear front signals work till you turn on the lights and there is no rear signals brake lights or running lights there is good grounds to body and engine flashers and ...

...signal light on my 1999 chev. s10 is not working My left turn signal started blinking fast. I checked and the left front blinker light worked fine but the left rear blinker light did not work. So I ...

...signal light switch will not affect the brake lights.....but.... If they are all red and you use the same bulbs for brake and signal....the brake light wiring goes through the signal light switch and ...

...light with turn signal on and while braking both sides. If you fail to get a pulsing positive signal on one side you may have lost an integral groung point in the turn sig. switch. Then it's time to ...

...signal is on and the brake light is on at the same time, the bulb will stay on steady on one side (away from the side you are signaling to) and the other side will flash. If all the fuses are good, ...

1987 Chevy S10 2WD. No signals/brake lights/tail lights please help! I recently drove to New York City, and there was A LOT of potholes! Some potholes I went over were VERY BUMPY...and ever since then

i have no tail lights, reverse lights or turn signals. my brake lights work when the head lights are turned off? Sounds like your turn signal switch is bad

signal and break light not working Yesterday was driving went to use right turn signal and it was blinking real fast front works passenger rear doesn't bought new bulbs checked wiring on socket looked

...light, turn signal. You can use a test meter to identify. What is the color code for trailer wiring? On a 4-Way flat trailer wiring harness, white is the ground, brown is running lights, yellow is ...