2002 Chevrolet S-10 "brake change" Questions

I am changing the front brakes on my 1995 Chev. S-10 (with ABS) When I changed the pads and put the caliper back on, and pumped the pedal to bleed the brakes, it seemed to have locked the brakes. Is ...

brake light switch. It isn't too hard to change. It is mounted near the top of your brake pedal arm. It is usually held in place with a pin and a clip, as well as the electrical connector. Locate your

91 CHEVY S10 Thank you. What you are saying is happening.The system is getting harder to press as I push down on the brakes. As i look the back brakes need to be replaced. they are all rusted looking ...

...the right fron brake doesnt release and gets hot even changed the rotor change the caliper,it is stuck ,also check the rubber brake line if the line collapses it will make the caliper not ...

hissing noise heard when brake pedal is appilied. changed master cylinder, rear wheel cylinders front pads and rotors what is solution? Is there any problems with the brakes besides the noise? If ...

...brake lines front and back in case they have calasped, new brakes pads, the one thing i know the two sensors in the front may be burnt, the front brakes will still get smokeing hot 10 miles down the ...

I have a 91 s10 and my brake light stay on how do i fix that. change the brake light switch on the brake pedal - its stuck on.

Anti lock brake light on I have a 1997 Chevy S10 pickup with anti lock brakes and I just changed the two front rotors and I made sure that the new rotors were for anti lock brakes, but now my anti ...

on our 200 s-10 the brake lights stay on when the on our 2000 s-10 the brake lights stay on when the truck is off,i changed the switch but did'nt help.what else can it be? the 3rd brake light on the ...

changed abs componet under hood didnt help brakes make hissing sound.peddel real hard.barley stops when standing on pedal The power brake booster located behind the brake master cylinder had a ...