1992 Oldsmobile Ninety Eight Regency "replace steel rear brake lines" Questions

...replace it, or if you don't want to start with a new part, you could disconnect it from the steel brake line that runs along the frame towards the rear of the car. (you don't have to remove it from ...

...rear. This is gravity bleeding, no pumping required. It's the only way to know for sure that each wheel cylinder and line is free of air. Only let the master cylinder drain down about half way each ...

...rear steel brake line this is a preformed steel brake line located along the rear axle leading to brake hoses connected to the left and right rear calibers. The brake line needs to be replaced or ...

...steel brake lines using a standard open end wrench although a flare wrech is recommended. You can purchase different length brake line at any parts store to replace the damaged line. In many ...

...replace myself? Depends on your mechanic ablilites. Steel brake line is basically 0.188 inch diameter line, and the metric 6mm line dia is very closely same. Dodge uses ISO bubble flare , and not the ...

replace the brake lines in the rear. I have 3 1/4 lines. Will these work? if u r replacing the steel lines on the rear axle then no....those lines r 3/16 lines..but if ur replacing the steel line from

...steel line, and efven that isn't usually the best idea. They're not that expensive -- replace the whole line if you can. Oh, you mentioned "flex tubing" If you mean the lines with the spring wrapped ...

...rear Check the links, Usually run them tight to frame rails until you reach flex lines,splitters or proportioning valves. 2001 Chevy Tracker 4WD TJ0411801 Brake Lines L34M41J10367 Tracker Steel Brake ...

...rear abs incorrectly . do you know of a routing diagram i can look at to check. the lines I got were pre bent stainless steel and are direct fit replacements but im stumped . they look like they only ...

...replace the line, You cannot repair a steel pressure line with a flexible hose, it could never handle the pressure. There are two options here: 1) replace the entire brake line which would be the ...