2001 Chevrolet S-10 "replace upper control arm 2002" Questions

...Replace the parts, as necessary. Fig. Front shock absorber mounting-2WD vehicles To install: Fully extend the shock absorber stem, then push it up through thelower control arm and spring so that the ...

...on a 2002 explorer sport the lower ball joints have to be pressed into the lower control arms.The upper ball joints are part of the upper control arm so the upper control arms have to be ...

REPLACE MOUNTAINEER UPPER BALL JOINTS? Upper Ball JointRemoval & InstallationBall joints on this vehicle are an integral part of the control arm. If the ball joint is defective, the entire control

...upper control arm and have it pressed in? The dealer's answer (if you are interested)....... The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering ...

...upper front right ball joint with out replacing control arm STOP!!! That ball joint comes in the arm assy. If you remove it, it will damage the thin arm and then you have safety concerns because the ...

...replace the upper control arm because it looks lower than the left upper control arm. I think your on the right track but i wouldnt rule out the axle.Does the car make a clicking sound when you

How do I replace the upper upper control arm,? upper intake,? upper dash panel? little help please

...upper ball joint you need to replace. Use a lug wrench.Raise that same front wheel off the ground using a floor jack and support the vehicle on a jack stand.Finish removing the tire.Take the cotter ...

...proceedure for replacing upper ball joint on 2002 ford explorer You can check using Google or You Tube Video but I think you have to replace the upper control arm I know the lower one is pressed ...

...replace the Front Right Passenger side upper control arm? - its looks like you have to remove the entire sway bar on each side and drop it down to pull the bolt out of the Control Arm? - How do you ...