...remove the trim on the cowl by the wipers. Under that you find a oval shaped metal plate that is sealed with caulk on the pass side. You need to scrape the caulk off and with a chisel break the plate ...
...PICKUP? You will have to remove all the cowlings from the steering column to access the ignition lock and switch. With the correct key inserted and selected to, probably, the ACC position, you should ...
How do you remove the windshield wiper arms Have 87 Chevy S10. How do you remove the windshield wiper arms? Need to remove the bolt on the backside of the wiper motor to replace it but cant get in the
...cowl. If you do not see it remember the belt routing as you remove it so you can replace it correctly. If it is a serpentine belt make sure the ribs of the belt are seated in all the pulleys before ...
...pickup dashboard? Hi There, First remove the steering wheel. Get together two containers, one for nuts bolts washers and screws and the other for the other parts removed Feel behind the spokes of the ...
Remove the cowl vent grille.3. remove the wiper linkage stud nut, detach the wiper link and unplug the electrical connector, then remove the motor assembly-to-firewall bolts, detach the motor and lift
1994 mazda b2300 wiper motor how do i install a wiper motor in a mazda 1994 b2300 pickup remove the wiper arms. then remove the cowl . the wiper motor then can be accessed for removal.
...pickup truck and the low beam headlights wont work only the high beams will work can anybody help me please check to make sure that both lamps aren't burnt out-halogens like to do that. I had a ...
...cowl screws, then remove the cover from the vehicle. NOTE: On a few of the early model vehicles covered by this manual, some of the heater core cover screws may be partially/fully covered by the ...
1,592 questions posted
Usually answered in minutes!
795 Questions
556 Questions
393 Questions
396 Questions
296 Questions