1995 Buick Skylark "coolant temp switch working" Questions

...coolant temp sensor and see if your fans come on. Another thing to do is be sure your cooling system has been burped (no more air bubbles). Those are some things to start with first I would let the ...

...coolant temp sensor no luck, does this model have a coolant temp switch? In fact it does! he coolant sensor is used by the PCM to control the engine fuel ratios at various temperatures. The coolant ...

coolant temp gauge on the dash instruments.) If the engine coolant temp switch is stuck open or in the cool mode, it may not trigger the fan relays. Meanwhile, your coolant temp on the dash gauge will

...coolant temp switch, checked fuses, when i disconnect coolant temp plug from coolant temp switch fans come on great this tells me that the relays are working fine and i have no codes in the computor ...

...only at low speed?(w/air)on.Coolant temp sensor and pressure switch at top left radiator has three connections,*All info:1989 Bmw 325i Top up the coolant and verify the sensor is working

...temp and coolant liquid both seems fine. the ac fan starts as soon as the ac is switched on the fan is provide cooling of the condenser before the radiator to prevent high head pressures in the ac ...

coolant temp sensor. Only codes, 159,157- bad MAF, 522 - Neutral safety switch. temp gauges will not work if there is insufficient coolant in the radiator, the sender unit is faulty or the wire to the

...coolant temp in the radiator. It is possible to have overheated coolant in the radiator, causing the steam, and your engine not overheating...the temp sensor for your engine is reflecting the engine ...

...coolant temp sensor? There should be two parts - a switch that turns on the Hot warning light or a sensor that works the temp gauge on the dash, and a second sensor for the computer. call parts store ...

...coolant sensor in the lock when it registers water temp at a preset temp setting , it reports to the ECM which then activates a relay and the fans run the set temp is close to the opening temp of the ...