1992 Buick Century "odometer resistor" Questions

1999 buick century odometer light does not work 1999 buick century odometer and gear selecter light does not work. Can part of the speed sensor go out? could this be a fuse or do I have to take dash ...

'98 Buick Century has no odometer/gear selector display Only the odometer and gear selector indicator displays are out. All other instrument lights work fine. I can't get my State's emissions test ...

2000 buick century odometer does not iluminate This is a common problem. After many hours of internet research, I stumbled upon the only repair suggestion that sounded reasonable to me. I performed ...

odometer not working.all fuses are good checked fuses.fuses are good. There are four resistors in the cluster that come loose. You will have to take out the gauge cluster, take it apart, de-solder the

2001 Buick Regal lights for odometer and PRNDL sometimes fade, sometimes go to black, and at other times, light up. Wrong! Non of the above. I just fixed that problem. The problem is loose resistors ...

My digital odometer and geat shift light cluster doesn't work- Will be necessary to repair to pass state inspection. Will this be expensive? Thank you I just fixed that problem. The problem is loose ...

Electronic odometer no longer lights up. 'Cluster' fuse is good, other lights on dash work. Where should I look for bad connections? Problems with the odometer and gearshift light level? The problem ...

I have a 2003 Buick Century and the odometer light is out I have a 2003 Buick Century and the odometer light is dim at engine start. When I release the emergency brake the headlights come on, which is

no odometer or gear selector light Problems with the odometer and gearshift light level? The problem is likely limited to four resistors on the circuit board inside the panel. There is at least one ...

PRNDL and odometer light faded to completely off. Is it as PRNDL and odometer light faded to completely off. Is it as simple as replacing a bulb? NO. Thats a common thing, you need a Istrument cluster