2003 Oldsmobile Alero "fuse instrument lights cluster" Questions

...fuse(s) for an open. 1 Did you perform the Instrument Cluster System Check? -- Go to Step 2 Go to Instrument Cluster System Check 2 Turn the ignition switch to the ON position. With the scan tool ...

...instrument panel and ac blinks off at the same time while driving, but it usually comes back on soon and it how the lights look when you turn the car on. Several times when I start the car these same ...

...fuse or relay switch ? if so could you tell me which one? or were i can locate it. CHECK 10 AMPS FUSES IN THE INSTRUMENT CLUSTER LEFT SIDE OF DASH. DRIVER SIDE FOR DASH LIGHTS AND SPEEDOMETER AND ...

lights were being displayed..no radio no gear indicators..replaced ignition switch about 1 year ago when gauges and cluster did same thing?? There'a s a rainwater collecting vessel just above the back

fuse? sounds like your electronic flasher unit maybe stuck causing the noise. they are generally located under the dash on driver side just below the instrument cluster. My wife alero had that problem

...Fuse(s). Circuit. Hydraulic solenoid relay. Hydraulic pump motor relay. Brake anti-lock sensor(s). Hydraulic anti-lock actuator assembly. Anti-lock brake warning indicator miniature bulb. Anti-lock ...

...fuse location for instrument cluster on my 04 GMC Sierra? Here you go. Under hood fuse block Ign. Fuse E and ipc/dic both fuses are 10 amp I hope this helps. Take care. Your instrument cluster ...

...lights and instrument cluster lights out left my lights on battery dead friend jumped off truck now tail lights and instrument cluster lights are out all fuses seem to be good although i went a head ...

instrument cluster and console lights are protected by fuse #2 (15 Amp) in the underhood fuse and relay box.  They actually get power from the tail lamp relay.  If the tail lamps are working

...instrument cluster and the lights are failing on the new one so it's not the cluster itself I'm just trying to figure out what fuse would what fuse or what wire would cause that to keep failing. ...