2002 Dodge Neon "brake sensor" Questions

...sensor keeps throwing code that its bad, it's been replaced replaced it 3 times, the catalytic converter, fuel injectors, O2 sensors, have all been changed as well. Still throws bad code. Stalls ...

...in system and brakes work well, very smooth and quiet. What do i do next. If it is the red light that says Brake, it could be the parking brake switch or the low fluid sensor on the master

...sensor mounting screws to 80 in. Lbs. (9 Nm) Brake booster hose and electrical harness in holders on end of valve cover Electrical connectors to camshaft position sensor 2.4L Turbo Engine To Remove: ...

...sensor. For SOHC engines, remove the brake booster hose and the electrical connectors form the holders on the end of the cylinder head cover. Unfasten the camshaft position sensor mounting screws, ...

2005 neon hard brakes engine races 2005 dodge neon Engine raced while driving to 5000 rpm Brakes got hard Now engine sputters and fluxtuates 2000 to 2500 rpm while driving While your car is running...

sensor, still sends that error, red dot light on in the cluster dont know what it is, an the airbag lights on too.... when you push the brake the idle goesup an down... thanks for the help replace the

...Recently changed this sensor on my 2004 sxt. Kind of a pain for someone that typically does oil/ brakes/ etc... Ran great but does leak a little oil. Mot enough for me to go back in,

...brake cleaner.. Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling Inspect all vacuum and PCV hoses, replace if necessary Check for a dirty fuel filter ...

sensor off and clean the small thin wires inside with a non-chlronated brake cleaner and let it dry for 10-15 minutes then re-install it and see if it will start. i have a 2000 dodge neon it

brake pad sensor wire, are there any lamps illuminated on the dash ? if the red brake warning lamp is on , then thats that, it also could be an ABS wire, again it should put a yellow lamp on the dash.