1995 Dodge Grand Caravan "makes shoot" Questions

BRAKE PEDAL GOES ALMOST TO THE FLOOR, DASH LIGHT ON FOR BRAKES, PEDAL APPEARS SPONGEY. SOUND LIKE AIR IN BRAKE LINES.CHECK BRAKE FLUID LEVEL MAKE SURE ITS NOT LOW. CHECK ALL BRAKE HOSES AND BRAKE ...

trouble shooting blower motor on 1997 dodge gran caravan blower for heater and defroster only works now and then Check the heat/ac relay first making sure it is working.remove it clean the contacts ...

too much pressure coming out of fuel cap when opening When i get gas i remove the gas cap and lots of pressure comes out of fueltank dont know why. Check engine light is not on. It's not unusual if ...

where is the engine ecm located on a 2001 Dodge Grand Caravan 3.3L 3.3L Flex fuel vehicle Rebecca, first thank you for providing year engine size and the fact that it's a flex fuel van. Your ECM ...

...shoot compressed air into it to try and clear the blockage as this just makes it worse,, Straighten a coat anger, and slowly work it up into the tube,, go a little at a time, and be ready to get at ...

i have a dodge grand caravan with a 3.3L engine and it keeps bursting my raidiator,i've replaced it three times in a short period of time,and it does not have a thermostat. hope u can help me.thanks! ...

99 grand caravan- one brake light works, the other doesnt. checked fuses, checked bulb, both are fine. what could cause one brake light to work but not the other, aside from the fuse under the dash? ...

FLUID WONT SHOOT OUT... Fluid wont shoot out Have someone hold their foot down hard after pumping the brake pedal. Open bleeder screw and fluid should shoot out. If it does not remove and clean tip. ...

trouble shooting nissan p1130 trouble code trouble shooting valves and also wiring diagrams Nissan makes many different cars and trucks and many different engines. You're missing all that critical ...

I have a 2013 cls shooting brake. The self levelling suspension may not be working as the car is riding low at the rear. John, Please elaborate on the term "shooting brake"......I'm not able to make ...