1993 Dodge Stealth "fire injectors" Questions

...coil...all fuses, relays.....it willl turn over but wont start first you must determine if it has fire, and fuel pressure if so then injector pulse. Any OBD codes???? you really need a scanner to

Irratic idle, sticking throttle, miss firing cylinder 4.? I've changed out the CPU with a new one. installed a tune up kit: plugs, wires, coil pack, ignition moduel. Replaced injector harness for ...

...fire if the plug has spark and all other cylenders are firing? What test told you it is not firing? You may have valve damage & little compression if cylinder getting spark not firing not getting ...

What causes injector not firing gas? FUEL INJECTOR NOT FIRING COULD BE FAULTY FUEL INJECTOR.HOOK A NOID TEST LIGHT TO FUEL INJECTOR ELECTRICAL CONNECTOR. CRANK THE ENGINE WATCH THE NOID TEST LIGHT ...

injectors s10 1991 .the injectors wont spray they have electricyty on the wire on the injectors fuelpomp works have fuel in line .its just the injectors wont sent inpuls. So your saying fuel pump ...

...injectors fire. check out both more than likely the injectors are not firing. maybe insufficant fuel pressure bad injectors if it is fuel injection look at the injectors they may not be fireing if it ...

the injectors fire simultaneously or whether they fire in sequence. One system used by Ford had all the injectors firing simultaneously up to about 1800/2000 rpm when they changed to sequential firing

...and ground to each injector. Check the grounds from the rear injectors to the computer. On a bank fired system as yours, all 3 injector grounds on each bank splice together before they go into the ...

...injectors not firing The injectore do not fire they simply open and squirt fuel. check the fuse for the fuel pump and fuel pump relay before we go any furthur Fuel system fuse good injectors power up ...

...fire/pulse to the injectors? it will start with starter fluid has fuel pressure in the fuel rail and fire to the spark plugs but no fire/pulse to the injectors The camshaft sensor may be bad. Check ...