can a faulty cam position sensor cause a car to not fire when it warms up No. A bad cam sensor usually causes a long crank before firing and a check engine light on steady with a code 41.
...cam shaft position sensor, crankshaft position sensor, ignition module, coil pack...still no spark, fuel check valve on engine shows fuel is connecting there. checked spark plugs with spark ...
Question about Buick Park Avenue
...cam to the crank etc. There were a couple nicks on that but I taped them up really well. I'm about to go check and see if the magnet is still in place for the camshaft. I'm a little confused where ...
...cam sensors repaired. Check the number on the ECM . If it has the number 1228253 on it that is your problem. They had a cutting off problem while driving. Get one with the number 16198264 on it. The ...
...check should give you an indication if there is a problem with the head or head gasket. If you have extremely low pressure on 1 or more cylinders then you probably do. The only way to be sure about a ...
cam position sensor is faulty and only after the engine is warm or could it be the fuel pump only 42,000 miles try replacing all the spark plugs that what is sounds like now it will not be the starter
...cam sensor and still cannot get it to fire...I really NEED this car to run so PLEASE if you can help me let me know soon...I am desperate. ok ! did you mean its got spark but does not start. if spark ...
Question about Buick Park Avenue
...check the cam sensor circuit if it is a 3.8 engine. Otherwise you have ECM problems Possible solution, I was having the same problem with my 1991 buick and my mechanic friend took a look and said he ...
...5--- Check the CRANK POSITION SENSOR. 6-- check the CAM POSITION SENSOR. 7-- Spark PLUGS and Wires. OK. I hope this can be a initial step to diagnostic your vehicle Thank you for use fixya..
Question about Buick Park Avenue
cam positioning sensor is one of the most faiiled electrical parts on a lot of newer cars. I would check that before anything else. But yes it could be the crank sensor as well. If no blown fuses than
740 questions posted
Usually answered in minutes!
690 Questions
585 Questions
482 Questions
474 Questions
426 Questions