1990 Buick Skylark "put transmission fluid motor hot" Questions

...transmission started immediately as soon as we put on new parts shifting hard -we unplugged the speedometer now it shifts fine what is wrong???? Your car has the 125c/3T40 model trans,3 speed ...

...transmission filter. Put it back together and run the engine until the transmission fluid gets hot. Then change the fluid and filter again. After this, monitor the transmission fluid dipstick. If any ...

...transmission before i did that i would put a can of thick STP motor oil Treatment in the transmission because it thickens up the transmission fluid and make my car shift like new. Its not going to ...

...put transmission fluid and can hardly shift gears or gain speed., transmission fluid gets added to the same spot where you check it. Add small amounts at a time. Check while car is running and motor ...

...put the transmission into the first gear that your car is not going forward which tells me that your problem happens to be in your transmission linkages. You can check the transmission fluids to see ...

...put oil for trasaxsil In the motor. the transaxle fluid is the the same as the automatic transmission fluid.there is a transmission dipstick to check the level make sure the car is on a level ...

...transmission flushed almost 2 years ago and since then have put 12,000 plus miles on it. All I know is you are suppost to check the transmission fluid while the car is running and idling at normal ...

transmission gear selector and the parking brake, and put blocks behind and in front of the rear tires before you climb underneath the car. Cars roll off of jacks, ramps and whatever enables mechanics

...put it in reverse. i also noticed that the transmission has too much fluid. it only bucks when the car starts to get hot. when its cold, you dont feel it as much. some people told me motor mounts, ...

...put in drive. It will set there for a little while before it goes into gear. It also seems to go out of gear sometimes when stopping. The rest of the shifting is positive without any slippage. Have u ...