2006 Chevrolet Impala "55 200" Questions

...be 40 to 55 psi if pressure is lower check hi side if pressure is over 200 psi the expancion valve is damage or got a problem in the evaporator the hi side work with a pressure from 140 to ...

200-350 PSI Don?t assume that if adding little Freon is good that adding a lot is better!  Overcharging just a little can decrease the performance of the system and possibly damage

...200/210 273/282 106/116 111.25 55 .272/.271 .408/.407 .449/.448 1967-68 400HO w/ MT 9779067(P) OEM 200/213 273/289 113.5 54 .272/.271 .408/.407 .449/.448 1968 400 HO MT & RA-I AT, 1969 350 HO MT, ...

...to make sure I'm correct, drive it and listen to all the gears. When at 55-60mph after it has gone into it's top gear it will normally drop about 200-300rpm when the torque converter locks

200 silverado backfires when accelerateing and takes at least 3 times rolling over to start, recently replaced fuel pump. ck fuel pressure 55-62psi. , a bad Crank Position Sensor MAY cause that

what to set torque specs for head bolts on 1968 mustang 200. engine? changing head gasket need to know to torque head bolts n it is a 3 step torque 1 st is 55 lb then 65 and final is 70-75 lb

200 series has a vibration at 1000/1200rpm at 55 to 60KPH slightly more pressure on the throttle and the vibration disappears. If you can drive this speed at such low RPM I think you are "lugging" the

...55 plate tdi, coolant leak after engine is turned off. i drove 200 miles and it did not leak until i got home and turned engine off. any help please. Did you overheat the engine before.Looks like ...

200),vacuum leak found A code of "55" represents end of error codes. If this is all you get then no error codes are stored in the computer. This is the normal condition. sorry there is no code 5, have

...55 and 65 mph. Above and below this mph is does not chugg. Check Engine light is NOT on nor does it come on. I thought it might be the Mass Air Flow unit but that costs nearly $200 dollars so I don't ...