...f250 the id tag is 3 31 D6TA FJB 603713 4 Judging by those numbers, gear ratio is 3.31. You can test this theory, by blocking the front wheels and jack the rear end up enough to get the tires off the ...
...rear tire feels like going over rumble strips but not all the time checked tires and rotated maybe wheel bearing? truck has limited slip rear sound like your limited slip clutch in the differental is ...
My 2004 f-250 front end wobbles side to side @ about 45 mph and lopes when U turn sharp and back up. Has new tie rods. What might cause this? S.M. Sounds like a belt shift in a front tire. Raise the ...
Question about Chevrolet TrailBlazer
...a vent tube on the pasanger side that runs along the axel and ends behind the rear tire Should have a bolt with a 3/8 drive ratchet can fit in without a socket on it. It will just be a square ...
Question about Chevrolet TrailBlazer
...f250 skid in reverse only Rear wheels on 2000 super duty f250 skid in [reverse only] in four wheel drive. In two wheel drive the drivers side locks up in [reverse only] and you have to pour on the ...
...f250 4x4 remove tire,loosen and remove caliper 2 bolts on rear side of caliper,usually a allen/torque wrench or a standard wrench if u got all 3 ur good,fully remove caliper disc slides right off ...
Question about Chevrolet TrailBlazer
...f250 superduty, lugs off and tire still wont budge trying to get left rear tire off truck, lugs are off but tire is not loose, whats holding it up if the car has high mileage etc try spraying wd 40 ...
...rear tire had power and was slipping on the snow. What am I missing here? Thanks! Hi there , in order for your 4 wheel to work you have to drive a couple feet for everything to lock. If you are ...
Question about Chevrolet TrailBlazer
...F250 V8 4X4. i was pulling a Chevy out of the dirt (true story) and i noticed only my back wheels were spinning. i had it in 4H and 4L but only the back wheels spun. how can i tell if my 4 wheel ...
...down out of the holder on a 2003 F-250 . Hi ...where your jack is ..there should be a tool ...that requires you to put it in your rear ,near your bumper area ....to crank down the tire ...good ...
5,006 questions posted
Usually answered in minutes!
2,541 Questions
1,576 Questions
1,050 Questions
976 Questions
217 Questions