Question about Pontiac Grand Prix
...module (BCM) uses the discrete ignition switch inputs ignition 1, ignition 3 and crank to distinguish the correct power mode. Once the BCM has determined the power mode selected by the vehicle ...
Question about Pontiac Grand Prix
...Module (BCM) on it please? Question edited for clarity, add maker. Question moved to model category. Jeff our Automotive electronic expert provides the answer Jeff Armer Jan 28, 2024 Body Control ...
Question about Pontiac Grand Prix
module that can't be communicated with, that isn't throwing engine errors? Absolutely. The ECM manages the engine and will display engine codes. The BCM is for non engine things. So I would not expect
...module(bcm) Sometimes if you unplug the bcm and wait a minute and plug it back in it may work again. Sometimes they lock up. Body Control Module Replacement Removal Procedure Notice: Electrostatic ...
Question about Pontiac Grand Prix
...module (BCM) with an GM Service Parts Operation (SPO) Replacement Part, set up the replacement BCM prior to the 10-minute relearn procedure or the 30-minute relearn procedure. Refer to Body Control ...
...module (BCM) notifying it that the ignition is in the Start position. The BCM then supplies a class 2 message to the engine control module (ECM) / powertrain control module (PCM) notifying it that ...
Question about Pontiac Grand Prix
removing and installing a 2002 grand prix body control module body control module try googling for the diagram We're is the bcm located on the Pontiac grand prix 2002
...bcm (BODY CONTORL MODULE) or are you look for an ECM or PCM, the part number is looked up by the part store you are dealing with, the number you need is the computer number, you will need to remove ...
...Module (BCM). It is located on the passenger side under the dash. The is a panel to remove to acess it. It is black, and about 7" X 5" square and about 1 1/2" thick. Unfortunetly your car also has a ...
BCM - body control module ! Door Locks Power and Ground For door lock operation, the IP Fuse Block supplies battery positive voltage, through the 15 amp DR LK/TRUNK fuse, to the BCM. The BCM uses this
1,787 questions posted
Usually answered in minutes!
1,496 Questions
1,236 Questions
1,043 Questions
1,014 Questions
893 Questions