1998 Oldsmobile Aurora "cv boots vehicles need replaced" Questions

Ad

...CV joint / boot is still ok. The joint does need grease in there and the rubber boot fitted properly very soon. As the suspension is set, the axle does little more than provide drive. It doesn't ...

Ad

Question about Oldsmobile Aurora

1 Answer

...CV-Joints Overhaul These vehicles use several different types of joints. Engine size, transaxle type, whether the joint is an inboard or outboard joint, even which side of the vehicle is being ...

Ad

cv boot replacement on a 1999 grand cherokee 4x4 6 cilinder I need help on replacing the boots on this vehicle. What are the main bolts or nuts I need to remove to expose the boot? Also what causes ...

cv boot cracked.Need to know how to change right side cv joints Best way is to replace the whole shaft. Q: Why not just the boot it self? A: Yes, you can but when the boot broke the inside is broke or

...cv boot for a 99 ford f-150? I need to replace one on the drivers side. It appears to ba a major repair to take all that off to just replace the boot. Removing/Replacing the cv shaft is not as much ...

Question about Oldsmobile Aurora

1 Answer

...boots have **** open, then the grease that is provided to the cv joint will eventually wash out and the unit will self destruct leaving the vehicle immobile. You should have them replaced to avoid an ...

Question about Oldsmobile Aurora

2 Answers

boots on your cv joints. If the boots are cut or the grease is heavy on the outside of the boot your cvf joint may need replacing. could be a couple of things, can be upper strut mounts ,ball joint or

Question about Oldsmobile Aurora

2 Answers

...CV joints. Check 4 boots for tears. Also grab shafts and tug--check for play in joints. Replace axles that have play in CV joints. Let us know if you need instructions. Issue with Your Front axel ...

Question about Oldsmobile Aurora

1 Answer

...new brakes,no stones to be seen i thought maybe bearings but they seem ok too.so now its the cv joints i need to inspect can you help Please see this article for detailed information! Good Luck! ...

Question about Oldsmobile Aurora

1 Answer

...boots or retaining bolts holding the shaft into the spyder or inner CV joint. Once removed pull the half shaft out of the housings keeping everything as clean as possible and wrap in a plastic bag.. ...

Not finding what you are looking for?
1998 Oldsmobile Aurora Logo

566 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...